PROFESSIONAL SUPPORT
ALWAYS LOW PRICES
100% SATISFACTION GUARANTEED
-
(0)
-
You have no items in your shopping cart.
-
- The ability to install RRU & PDB. - The ability to be installed on Base Frame and i-Beam. - Hot-dip Galvanized iron.
- The ability to install on roof and ground chassis - The ability to install up to 9 RRU on each stand - Hot-dip galvanized iron
- Hot-dip Galvanized Iron. - Possibility to close on Lattice mast with pipe base, corners, four-ply and rebar with different dimensions. - Easy Install. - High durability against corrosion and rust. - Possibility to install 60-114 mm pipe for antenna. - The price does not include the mounting pipe. - All joints and bolts are made of warm galvanized and grade 8.8 - The pipe must be ordered separately in accordance with requirements.
- Stand for installing PDB - Ability to be installed on I-Beam and Base frame. - Hot dip Galvanized Iron.
- Hot-dip Galvanized Iron. - Can be closed on a Lattice towers with a pipe base, an anchor, four-ply and rebar with different dimensions. - Possibility to install different kinds of antenna. - Easy Install. - High durability against corrosion and rust. - Possibility to install 60-114 mm pipe for antenna. - The price does not include the mounting pipe.The pipe must be ordered separately in accordance with requirements.
- Suitable for outdoor sites. - Iron coated with Electro static color. - Plastic injected into the doors to prevent water penetration into the electrical installation.
This type of chassis does not require any Concreting and demolishing the roof , and is used to place racks on rooftop sites. - Possibility to add sun shade. - The foundations should be on the head of the building columns. - Ability to install PTB Stand.
- Hot-dip Galvanized Iron. - Possibility to install on lattice towers with pipe base, corners, four-ply and rebar with different dimensions. - Easy Install. - High durability against corrosion and rust. - Possibility to install 60-114 mm pipe for antenna. - Ability to install two antennas in one direction. - The price does not include the mounting pipe.The pipe must be ordered separately in accordance with requirements. - All joints and bolts are made of Hot dip galvanized and grade 8.8.
- Suitable for outdoor sites. - Iron coated with Electro static color. - Plastic injected into the doors to prevent water penetration into the electrical installation.
- Hot dip Galvanized Iron. - Standard Dimension 3.5 * 4 m. - Ability to manufacture according to the requested dimensions. - Rack protection from wind and rain.
hot Galvanized metal For use in cold places, to prevent damage to the antennas on the mast, they cause ice cuts from higher points.
THE 3-SECTOR FRAME Is a two level support designed for installation of three panel antennas on the same bracket. The c/c distance between the antennas is 500 mm. FLEXIBILITY The support can be mounted to basically any type of frame leg for example round, square, 60° angle as well as 90° thanks to the very flexible bracket. QUALITY All components are made of anodized aluminium and stainless steel which gives the support excellent corrosion resistance. EASY ASSEMBLY The choice of materials makes the product very light which makes the handling and installation very easy.
FLEXIBLE ALD MOUNTING SUPPORT Is designed for installation of 1-3 antenna line device units such as TMA, filters etc. By adding expansion for ALD mounting support it is possible to install up to 6 units of antenna line device. FLEXIBILITY The flexible ALD mounting support can handle a wide range of all common frame leg designs, round, square, angle etc. Thanks to the unique design. You can choose the position of the included mounting tube. This can be done by turning the tube holder in reverse position or mount the tube holder on the inside or the outside of the clamp. These options makes the support very flexible and easy to optimize for your type of installation. QUALITY All components are made of anodized aluminium and acid proof stainless steel which gives the support excellent corrosion resistance. EASY ASSEMBLY The choice of materials and design makes the product very light which makes the handling and installation very easy.
- To protect RBS 6102 Ericsson. - hinges design from the inside for lack of access and more security. - Built up with Expanded sheet. - 2 door lining design for better opening of BTS door. - Design for protection and lack of access to rack battery. - A sophisticated design of locks and hinges for more safety. - Hot dip Galvanized Iron.
Telecommunication rack guard -To increase the level of safety of telecommunication racks and prevent theft of equipment and batteries -The inability of the burglar to cut the locks and tabs and hinges -The ability to install in ground and roofing areas -Iron with hot galvanized -Easy installation and relocation