Telecom

RRU & PDB Stand

0 review(s)
Call for pricing

- The ability to install RRU & PDB. - The ability to be installed on Base Frame and i-Beam. - Hot-dip Galvanized iron.

RRU Stand

0 review(s)
Call for pricing

- The ability to install on roof and ground chassis - The ability to install up to 9 RRU on each stand - Hot-dip galvanized iron

Universal Single GSM Mounting

0 review(s)
0 ریال excluding shipping

- Hot-dip Galvanized Iron. - Possibility to close on Lattice mast with pipe base, corners, four-ply and rebar with different dimensions. - Easy Install. - High durability against corrosion and rust. - Possibility to install 60-114 mm pipe for antenna. - The price does not include the mounting pipe. - All joints and bolts are made of warm galvanized and grade 8.8 - The pipe must be ordered separately in accordance with requirements.

PDB Stand

0 review(s)
Call for pricing

- Stand for installing PDB - Ability to be installed on I-Beam and Base frame. - Hot dip Galvanized Iron.

Universal Single MW Mounting

0 review(s)
Call for pricing

- Hot-dip Galvanized Iron. - Can be closed on a Lattice towers with a pipe base, an anchor, four-ply and rebar with different dimensions. - Possibility to install different kinds of antenna. - Easy Install. - High durability against corrosion and rust. - Possibility to install 60-114 mm pipe for antenna. - The price does not include the mounting pipe.The pipe must be ordered separately in accordance with requirements.

AC PDB ( 3 Phases )

0 review(s)
Call for pricing

- Suitable for outdoor sites. - Iron coated with Electro static color. - Plastic injected into the doors to prevent water penetration into the electrical installation.

IBeam Nonpenetration

0 review(s)
0 ریال excluding shipping

This type of chassis does not require any Concreting and demolishing the roof , and is used to place racks on rooftop sites. - Possibility to add sun shade. - The foundations should be on the head of the building columns. - Ability to install PTB Stand.

Universal Double GSM Mounting

0 review(s)
6 ریال excluding shipping

- Hot-dip Galvanized Iron. - Possibility to install on lattice towers with pipe base, corners, four-ply and rebar with different dimensions. - Easy Install. - High durability against corrosion and rust. - Possibility to install 60-114 mm pipe for antenna. - Ability to install two antennas in one direction. - The price does not include the mounting pipe.The pipe must be ordered separately in accordance with requirements. - All joints and bolts are made of Hot dip galvanized and grade 8.8.

AC PDB ( Single Phase )

0 review(s)
Call for pricing

- Suitable for outdoor sites. - Iron coated with Electro static color. - Plastic injected into the doors to prevent water penetration into the electrical installation.

Ladders

0 review(s)
0 ریال excluding shipping

- Guiding feeders from the tower to the equipment. - Arranges the layout of the cables. - Possibility to design bases from 50 cm to 3 meters.

Greenfield sun shade

0 review(s)
Call for pricing

- Hot dip Galvanized Iron. - Standard Dimension 3.5 * 4 m. - Ability to manufacture according to the requested dimensions. - Rack protection from wind and rain.

Ice Shield

0 review(s)
0 ریال excluding shipping

hot Galvanized metal For use in cold places, to prevent damage to the antennas on the mast, they cause ice cuts from higher points.

Universal Mounting 3 Sector Frame

0 review(s)
Call for pricing

THE 3-SECTOR FRAME Is a two level support designed for installation of three panel antennas on the same bracket. The c/c distance between the antennas is 500 mm. FLEXIBILITY The support can be mounted to basically any type of frame leg for example round, square, 60° angle as well as 90° thanks to the very flexible bracket. QUALITY All components are made of anodized aluminium and stainless steel which gives the support excellent corrosion resistance. EASY ASSEMBLY The choice of materials makes the product very light which makes the handling and installation very easy.

Flexible ALD Mounting

0 review(s)
Call for pricing

FLEXIBLE ALD MOUNTING SUPPORT Is designed for installation of 1-3 antenna line device units such as TMA, filters etc. By adding expansion for ALD mounting support it is possible to install up to 6 units of antenna line device. FLEXIBILITY The flexible ALD mounting support can handle a wide range of all common frame leg designs, round, square, angle etc. Thanks to the unique design. You can choose the position of the included mounting tube. This can be done by turning the tube holder in reverse position or mount the tube holder on the inside or the outside of the clamp. These options makes the support very flexible and easy to optimize for your type of installation. QUALITY All components are made of anodized aluminium and acid proof stainless steel which gives the support excellent corrosion resistance. EASY ASSEMBLY The choice of materials and design makes the product very light which makes the handling and installation very easy.

RBS Cage 6102

0 review(s)
Call for pricing

- To protect RBS 6102 Ericsson. - hinges design from the inside for lack of access and more security. - Built up with Expanded sheet. - 2 door lining design for better opening of BTS door. - Design for protection and lack of access to rack battery. - A sophisticated design of locks and hinges for more safety. - Hot dip Galvanized Iron.