New products

Expanded sheet (Stretch metal)

0 review(s)
Call for pricing

- Production and design of different expanded sheets with different thickness and dimensions of the fountain. - Available in standard or custom sizes. - Producible with iron, aluminum and stainless steel alloys. - Uses: interior and exterior decoration of the building (facade), stairs, fences, shields, false ceilings, false floor and .... - The standard width of the sheet: 100 and 125 centimeters (the widths less than the standard will be calculated with a throwback). - Thickness of all kinds of sheets: from 1.5 mm to 8 mm. - Types of springs: 14 * 32, 22 * ​​60, 28 * 75, 38 * 100, 50 * 150, 60 * 200, 70 * 250 mm. - Prices are in 1 square meter.

Wall Mounting

0 review(s)
Call for pricing

-Suitable for areas with restricted use of the rig -In two types A and B -Type A: To connect to the wall -Type B: To connect to a column and metal surfaces -Two antennas can be connected in two opposite directions

Mushroom screw

0 review(s)
Call for pricing

- Hot galvanized - Mushroom head screws have a wide head and have a standard slot. -These screws are used bolting softer materials. - Their head diameters are larger to create a larger and more bearing level.

Roll Bolt

0 review(s)
Call for pricing

جنس : گالوانیزه گرم جهت اتصال قطعه به زمین یا دیوار.

Ice Shield

0 review(s)
0 ریال excluding shipping

hot Galvanized metal For use in cold places, to prevent damage to the antennas on the mast, they cause ice cuts from higher points.

Roll Bolt

0 review(s)
0 ریال excluding shipping

Material: hot galvanized To attach a piece to the ground or wall.

Fence Type C

0 review(s)
16,800,000 ریال excluding shipping

- It is designed to protect mobile sites or other locations with different levels of security. - Angle frame with mesh LW 60 and CW 22. - Thickness 2 mm. - Frame dimensions: 181 * 127 ,Height 3 meters. - According to MTN Irancell standards. - Prove connections with CO2 welding. - Double lame door prepared for entrance, Possibility to install the door in the corner or in the middle of the site. - No access to hinges from outside the fence for higher security. - Opening the door to the outside of the site due to lack of contact with the equipment inside the site. - Completely secured with guard from top. - Use barbed wire for better security. - Reinforcement of frames with 20*20 mm Profiles. - Price is by Per Meter

Chain Bracket 9 link

0 review(s)
Call for pricing

CHAIN BRACKET Is a fastening system for installation of telecom equipment or other type of equipment on monopoles or round poles. FLEXIBILITY: The Chain Bracket can be installed on any pole from Ø110 mm up to Ø1070 mm. A wide range of accessory mounts are available for mounting tubes, RRU:s, filters etc. even for compensation of inclination when installing on conical monopoles. QUALITY: All components are made of anodized aluminum and acid proof stain­less steel which gives the support excellent corrosion resistance. EASY ASSEMBLY: Handling and installation is very easy because of its light weight but also thanks to the pre-assembled kit system and the facile tightening process.

1- Link Support

0 review(s)
Call for pricing

1-L LINK SUPPORT Is designed for installation of several small radio links or one large link up to Ø3,0 meters with strut support. The 1-L link support can be installed on masts as well as conical towers. FLEXIBILITY The 1-Leg link support can handle a wide range of all common frame leg designs, round, square, angular, etc. thanks to the flexibility of the CUE DEE clamp 270. The oblong holes on the upper extension arms allow the support to compensate for inclined towers. QUALITY All components are made of anodized aluminium and stainless steel which gives the support excellent corrosion resistance . EASY ASSEMBLY The choice of materials makes the product very light which makes the handling and installation very easy.

Flexible ALD Mounting

0 review(s)
Call for pricing

FLEXIBLE ALD MOUNTING SUPPORT Is designed for installation of 1-3 antenna line device units such as TMA, filters etc. By adding expansion for ALD mounting support it is possible to install up to 6 units of antenna line device. FLEXIBILITY The flexible ALD mounting support can handle a wide range of all common frame leg designs, round, square, angle etc. Thanks to the unique design. You can choose the position of the included mounting tube. This can be done by turning the tube holder in reverse position or mount the tube holder on the inside or the outside of the clamp. These options makes the support very flexible and easy to optimize for your type of installation. QUALITY All components are made of anodized aluminium and acid proof stainless steel which gives the support excellent corrosion resistance. EASY ASSEMBLY The choice of materials and design makes the product very light which makes the handling and installation very easy.