RASIS Corporation online shop
Mountings
To install different antennas on different type of rigs, you need to fit the mounts. In this category, you will find all the necessary equipment.
Chain Bracket 9 link
CHAIN BRACKET Is a fastening system for installation of telecom equipment or other type of equipment on monopoles or round poles. FLEXIBILITY: The Chain Bracket can be installed on any pole from Ø110 mm up to Ø1070 mm. A wide range of accessory mounts are available for mounting tubes, RRU:s, filters etc. even for compensation of inclination when installing on conical monopoles. QUALITY: All components are made of anodized aluminum and acid proof stainless steel which gives the support excellent corrosion resistance. EASY ASSEMBLY: Handling and installation is very easy because of its light weight but also thanks to the pre-assembled kit system and the facile tightening process.
K-Frame Polygon GSM mounting
-Hot-dip galvanized iron -Possibility of closing on monopoly towers with a mast diameter of 350 to 500 mm -Easy installation -Ability to install at a height -Suitable for RRU installation -High durability against corrosion and rust -Ability to install 60 to 114 mm tube for antenna -The price does not include mounting pipe. The pipe must be ordered separately according to need
Universal Single RRU Support
UNIVERSAL SINGLE RRU SUPPORT Is designed for installation of one RRU unit on mast, towers or other vertical and horizontal structures. FLEXIBILITY The support can be installed on a wide range of all common vertical and horizontal structures such as round, square, angle etc. It can also be installed on wall. The support is designed for both a RRU unit and for a RRU unit combined with a PSU or A2 unit. QUALITY All components are made of anodized aluminum and acid proof stainless steel which gives the support excellent corrosion resistance. EASY ASSEMBLY Handling and installation is very easy thanks to its light weight but also thanks to its clever design with elongated opening holes allowing the clamp to be opened and closed without any loose parts which rapidly speeds up the installation.
Double Polygon GSM Mounting
-Hot-dip galvanized iron -Possibility of closing on monopoly towers with mast diameter of 350 to 650 mm -Easy installation -High durability against corrosion and rust -Ability to install 60 to 114 mm tube for antenna -Ability to install 2 antennas in one direction - The price does not include mounting pipe. The pipe must be ordered separately according to the need
Double RRU Support
THE DOUBLE RRU SUPPORT is designed for installation of two RRU units with possibility to attach a PSU on the back. FLEXIBILITY The RRU support can handle a wide range of all common frame leg designs such as round, square, angular, etc. QUALITY All components are made of anodized aluminium and stainless steel which gives the support excellent corrosion resistance. EASY ASSEMBLY The choice of materials makes the product very light which makes the handling and installation very easy.
K-Frame spiral GSM mounting
-Hot-dip galvanized iron -Possibility of closing on multi-sided masts with mast diameter of 300 to 900 mm -Easy installation -Ability to install at a height -Suitable for RRU installation -High durability against corrosion and rust -Ability to install 60 to 114 mm tube for antenna. - The price does not include mounting pipe. The pipe must be ordered separately according to need
Double Pole-16.7 GSM Mounting
- Hot-dip Galvanized Iron. - Possibility to install on Pole towers with diameter of 160-220 mm. - Easy install. - High durability against corrosion and rust. - Possibility to install 60-114 mm pipe for Antenna. - The price does not include the mounting pipe. - The pipe must be ordered separately in accordance with requirements.
Double Polygon GSM Mounting
-Hot-dip galvanized iron -Possibility of closing on monopoly towers with mast diameter of 350 to 650 mm -Easy installation -High durability against corrosion and rust -Ability to install 60 to 114 mm tube for antenna -Ability to install 2 antennas in one direction - The price does not include mounting pipe. The pipe must be ordered separately according to the need
Single Polygon GSM Mounting
- Hot-dip Galvanized Iron. - Possibility to install on monopole towers with a diameter of 350-550 mm. - Easy Install. - High durability against corrosion and rust. - Possibility to install 60-114 mm pipe for antenna. - The price does not include the mounting pipe.The pipe must be ordered separately in accordance with requirements.
Polygon MW mounting
- Hot-dip Galvanized Iron. - Possibility to install on monopole towers with a diameter of 350-650 mm. - Easy Install. - High durability against corrosion and rust. - Possibility to install 60-114 mm pipe for antenna. - The price does not include the mounting pipe.The pipe must be ordered separately in accordance with requirements.
Double Spiral GSM Mounting
- Hot-dip Galvanized Iron. - Possibility to install on monopole towers with a diameter of 350-650 mm. - Easy Install. - Ability to install two antennas in one direction. - High durability against corrosion and rust. - Possibility to install 60-114 mm pipe for antenna. - The price does not include the mounting pipe.The pipe must be ordered separately in accordance with requirements.
Pole MW-16.7 mounting
- Hot-dip Galvanized Iron. - Possible to install on towers with a diameter of 160-220 mm. - Easy Install. - High durability against corrosion and rust. - Possibility to install 60-114 mm pipe for antenna. - The price does not include the mounting pipe.The pipe must be ordered separately in accordance with requirements.
Single Spiral GSM Mounting
- Hot-dip Galvanized iron. - Possibility to install on monopole towers with a diameter of 350-650 mm. - Easy Install. - High durability against corrosion and rust. - Possibility to install 60-114 mm pipe for antenna. - The price does not include the mounting pipe.The pipe must be ordered separately in accordance with requirements.
Spiral MW Mounting
- Hot-dip Galvanized Iron. - Possibility to install on monopole towers with a diameter of 350-650 mm - Easy Install. - High durability against corrosion and rust - Possibility to install 60-114 mm pipe for antenna. - The price does not include the mounting pipe.The pipe must be ordered separately in accordance with requirements.
K-Frame spiral GSM mounting
- Hot-dip Galvanized Iron - Ability to install on Polygon towers with diameter of 300-900 mm - Easy Install - Ability to install in one height - Suitable for installing RRUs - High durability against corrosion and rust - Possibility to install 60-114 mm pipe for antenna - The price does not include the mounting pipe,The pipe must be ordered separately in accordance with requirements.